Modify Selection
- Hazard prevention and control:
- Span design
- or
- Pressure arch design
- or
- Roof beam design
- or
- Skin control
- or
- Scaling
- or
- Highwall design
- or
- Support design and selection
Home Links
Results 91 - 100 of 106
-
1/1/2001 - Peer reviewed journal articlesThis paper summarizes case studies where unusual circumstances required that a longwall retreat into or through previously driven rooms. Two types of roof failure are identified and discussed.
-
This paper presents an overview of the most significant ground control hazards facing today's mineworkers, as well as best practices to reduce these risks.
-
7/1/2000 - Technology NewsThis video, entitled "Ground Support...It's Important, or Miner Mike Saves the Day," presents information on why ground supports work and how to install them properly.
-
4/1/2000 - Conference papersResearchers are investigating the physical properties of cable bolts by replacing the conventional king wire with a modified king wire on which strain gauges have been installed.
-
3/1/2000 - Conference papersA NIOSH study of the time-dependent response of rock stressed along weakness planes with the objective to improve mine safety by reducing the number of roof falls that cause injuries and fatalities to miners.
-
This video teaches the necessity and use of ground supports.
-
8/1/1999 - Conference papersThis paper discusses a design methodology for standing secondary tailgate supports, using the performance characteristics generated in the NIOSH Mine Roof Simulator (MRS) to match load characteristics of various supports to ground reaction behavior.
-
3/1/1999 - Conference papersTo help mitigate the potential for falls-of-ground injuries to underground stone miners, NIOSH developed the Roof Monitoring Safety System (RMSS) to aid in monitoring dangerous levels of roof beam deflection.
-
This video teaches the importance of proper roof scaling in underground mining to avoid injury and improve work conditions.
-
1/1/1999 - Conference papersA study on the mechanics of strata behavior determined through extensive field measurements. Practical techniques for assessing roof behavior were developed along with a prototype remote controlled roof support system.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program